Filter
Top Products
98 Status Registers & Result Codes
Command bit dec hex Function and description Ref.
32 20 Ignore RTS (CTS always
ON) in synchronous mode.
(Default).
&D2
6-7 0 0 Assume DTR always On. &D0
64 40 108.1, DTR OFF-ON
transition causes dial of the
default number.
&D1
128 80 108.2 Data Terminal Ready,
DTR OFF causes the
modem to hang up and
return to command state.
&D2
192 C0 108.2, DTR OFF causes the
modem to hang up and reset
the modem to profile 0 after
DTR dropped.
&D3
S23= bit dec hex Bit mapped register. +105
0 0 0 Command echo disabled. E0
1 1 Command echo enabled. E1
1 0 0 Tone dial. (Default). T
2 2 Tone dial. P
2 0 0 Pulse dial make/break ratio
= 39% / 61%.
&P0
4 4 Pulse dial make/break ratio
= 33% / 67% (Default).
&P1
3-5 0 0 ATX0 (See result code
table.)
X0
8 8 ATX1 X1
16 10 ATX2 X2
24 18 ATX3 X3
32 20 ATX4 X4
40 28 ATX5, error control result
code enabled (Default).
X5