Filter
Top Products
WAP3205 v2 User’s Guide 113
CHAPTER 13
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• WAP3205 v2 Access and Login
• Internet Access
• Resetting the WAP3205 v2 to Its Factory Defaults
• Wireless Router/AP Troubleshooting
13.1 Power, Hardware Connections, and LEDs
The WAP3205 v2 does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the WAP3205 v2.
2 Make sure the power adaptor or cord is connected to the WAP3205 v2 and plugged in to an
appropriate power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the WAP3205 v2.
4 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.7 on page 13.
2 Check the hardware connections. See the Quick Start Guide.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Disconnect and re-connect the power adaptor to the WAP3205 v2.
5 If the problem continues, contact the vendor.