Filter
Top Products
Chapter 5 Universal Repeater Mode
WAP3205 v2 User’s Guide
41
5.8 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Wireless LAN > Site Survey to open the following screen.
Figure 24 Universal Repeater Mode: Wireless LAN > Site Survey
Channel Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in.
Security Mode Select WPA-PSK or WPA2-PSK if the access point to which you want to connect uses
WPA-PSK or WPA2-PSK.
Encryption Type Select the type of wireless encryption employed by the access point to which you want to
connect.
Pre-Shared Key WPA-PSK or WPA2-PSK uses a simple common password for authentication.
Type the password employed by the access point to which you want to connect.
Apply Click Apply to save your changes back to the WAP3205 v2.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 18 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
LABEL DESCRIPTION