Filter
Top Products
Chapter 5 Universal Repeater Mode
WAP3205 v2 User’s Guide
35
Figure 19 Status: Universal Repeater Mode
The following table describes the labels shown in the Status screen.
Table 14 Status Screen: Universal Repeater Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the WAP3205 v2’s model name.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP3205 v2 is set -
Universal Repeater Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN Information
WLAN OP Mode This is the device mode (Section 2.1.1 on page 15) to which the WAP3205 v2’s wireless LAN
is set - Universal Repeater Mode.
MAC Address This shows the wireless adapter MAC Address of your device.
Status This shows the current status of the Wireless LAN - ON.