Filter
Top Products
Chapter 10 Wireless LAN
WAP3205 v2 User’s Guide
94
10.7 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
and high-throughput physical mode settings.
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 62 Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 37 Network > Wireless LAN > Advanced
LABEL DESCRIPTION
RTS/CTS
Threshold
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
(Clear To Send) handshake.
Fragmentation
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages. It
is the maximum data fragment size that can be sent. Enter an even number between 256
and 2346.
Output Power Set the output power of the WAP3205 v2 in this field. If there is a high density of APs in an
area, decrease the output power of the WAP3205 v2 to reduce interference with other APs.
Select one of the following 100%, 90%, 75%, 50%, 25% or 10%. See the product
specifications for more information on your WAP3205 v2’s output power.
Network Mode Select 11b only to allow only IEEE 802.11b compliant WLAN devices to associate with the
WAP3205 v2.
Select 11g only to allow only IEEE 802.11g compliant WLAN devices to associate with the
WAP3205 v2.
Select 11n only to allow only IEEE 802.11n compliant WLAN devices to associate with the
WAP3205 v2.
Select 11 b/g mixed mode to allow both IEEE802.11b and IEEE802.11g compliant WLAN
devices to associate with the WAP3205 v2. The transmission rate of your WAP3205 v2
might be reduced.
Select 11 b/g/n mixed mode to allow both IEEE802.11b, IEEE802.11g and IEEE802.11n
compliant WLAN devices to associate with the WAP3205 v2. The transmission rate of your
WAP3205 v2 might be reduced.