A SERVICE OF

logo

Open as PDF
next previous
Special Features
5-14
Copying
5
• Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure
(Density)," on p. 5-6.)
• Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"
on p. 5-4.)
5
Press [B&W Start] or [Color Start].
The machine begins scanning.
NOTE
•
After printing of the current copy job is complete, the next copy job begins.
•
If the memory becomes full while scanning, <MEMORY FULL> appears in the LCD.
When the ADF is used for scanning, the document being scanned stops in the ADF.
Follow the procedure in "Removing Jammed Paper from the ADF," on p. 9-22 to clear the
paper jam in the ADF.
All of the scanned documents will be erased if <MEMORY FULL> appears, so divide the
document and copy each part separately, or select a lower image quality mode and
make copies again.