48-12
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 48 Configuring Inspection for Voice and Video Protocols
H.323 Inspection
–
Delete—Deletes an HSI group.
• Inspections—Tab that shows you the H.323 inspection configuration and lets you add or edit.
–
Match Type—Shows the match type, which can be a positive or negative match.
–
Criterion—Shows the criterion of the H.323 inspection.
–
Value—Shows the value to match in the H.323 inspection.
–
Action—Shows the action if the match condition is met.
–
Log—Shows the log state.
–
Add—Opens the Add H.323 Inspect dialog box to add an H.323 inspection.
–
Edit—Opens the Edit H.323 Inspect dialog box to edit an H.323 inspection.
–
Delete—Deletes an H.323 inspection.
–
Move Up—Moves an inspection up in the list.
–
Move Down—Moves an inspection down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit HSI Group
Configuration > Global Objects > Inspect Maps > H323 > H323 Inspect Map > Advanced View >
Add/Edit HSI Group
The Add/Edit HSI Group dialog box lets you configure HSI Groups.
Fields
• Group ID—Enter the HSI group ID.
• IP Address—Enter the HSI IP address.
• Endpoints—Lets you configure the IP address and interface of the endpoints.
–
IP Address—Enter an endpoint IP address.
–
Interface—Specifies an endpoint interface.
• Add—Adds the HSI group defined.
• Delete—Deletes the selected HSI group.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—
