A SERVICE OF

logo

62-14
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 62 Configuring the ASA IPS Module
Configuring the ASA IPS module
Step 6 Click Launch Startup Wizard. Complete the screens as prompted. For more information, see the IDM
online help.
(ASA 5510 and higher) If you configure virtual sensors, you identify one of the sensors as the default.
If the ASA series does not specify a virtual sensor name in its configuration, the default sensor is used.
What to Do Next
For the ASA in multiple context mode, see the “Assigning Virtual Sensors to a Security Context
(ASA 5510 and Higher)” section on page 62-15.
For the ASA in single context mode, see the “Diverting Traffic to the ASA IPS module” section on
page 62-16.