Enterasys Networks D2G124-12P Manual

A SERVICE OF

next previous

set spantree lpwindow

6-46 Spanning Tree Configuration

set spantree lpwindow

UsethiscommandtosettheLoopProtecteventwindowvalueinseconds.

Syntax

set spantree lpwindow value

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

TheLoopProtectWindowisatimervalue,inseconds,thatdefinesaperiodduringwhichLoop

Protecteventsarecounted.Thedefaultvalueis180seconds.Ifthetimerissetto0,theevent

counterisnotresetuntiltheLoopProtecteventthresholdisreached.Ifthethreshold

isreached,

thatconstitutesaloopprotectionevent.

Example

ThisexampleshowshowtosettheLoopProtecteventwindowto120seconds:

D2(rw)->set spantree lpwindow 120

show spantree lpwindow

UsethiscommandtodisplaythecurrentLoopProtecteventwindowvalue.

Syntax

show spantree lpwindow

Parameters

None.

Defaults

None.

Mode

Switchcommand,read‐only.

Example

ThisexampleshowshowtodisplaythecurrentLoopProtectwindowvalue:

D2(rw)->show spantree lpwindow

The Loop Protect event window is set to 120 seconds

value Specifiesthenumberofsecondsthatcomprisetheperiodduringwhich

LoopProtecteventsarecounted.Thedefaulteventwindowis180

seconds.