Enterasys Networks D2G124-12P Manual

A SERVICE OF

next previous

show radius accounting

D-Series CLI Reference 15-7

Examples

Thisexampleshowshowtoclearallsetting sonallRADIUSservers:

D2(su)->clear radius server all

ThisexampleshowshowtoresettheRADI UStimeouttothedefaultvalueof20seconds:

D2(su)->clear radius timeout

show radius accounting

UsethiscommandtodisplaytheRADIUSaccountingconfiguration.Thistransmitsaccounting

informationbetweenanetworkaccessserverandasharedaccountingserver.

Syntax

show radius accounting [server] | [counter ip-address] | [retries] | [timeout]

Parameters

Mode

Switchcommand,read‐only.

Defaults

Ifnoparametersarespecified,allRADIUSaccountingconfigurationinformationwillbe

displayed.

Example

ThisexampleshowshowtodisplayRADIUSaccountingconfigurationinformation.Inthiscase,

RADIUSaccountingisnotcurrentlyenabledandglobaldefaultsettingshavenotbeenchanged.

Oneserverhasbeenconfigured.

FordetailsonenablingandconfiguringRADIUSaccounting,referto“setradiusaccounting”on

page 15‐8:

D2(ro)->show radius accounting

RADIUS accounting status: Disabled

RADIUS Acct Server IP Address Acct-Port Retries Timeout Status

------------------ ---------- --------- ------- ------- ------

1 172.16.2.10 1856 3 20 Disabled

server (Optional)DisplaysoneorallRADIUSaccountingserverconfigurations.

counterip‐address (Optional)DisplayscountersforaRADIUSaccountingserver.

retries (Optional)Displaysthemaximumnumberofattemptstocontactthe

RADIUSaccountingserverbeforetimingout.

timeout (Optional)Displaysthemaximumamou ntoftimebeforetimingout.