Enterasys Networks D2G124-12P Manual

A SERVICE OF

next previous

set pwa initialize

D-Series CLI Reference 15-65

Usage

PWAwilluseaguestpasswordandguestusernametograntnetworkaccesswithdefaultpolicy

privilegestouserswithoutestablishedloginnamesand passwords.

Example

ThisexampleshowshowtoenablePWAguestnetworkingwithRADIUSauthentication:

D2(su)->set pwa guestnetworking authradius

set pwa initialize

UsethiscommandtoinitializeaPWAporttoitsdefaultunauthenticatedstate.

Syntax

set pwa initialize [port-string]

Parameters

Defaults

Ifport‐stringisnotspecified,allportswillbeinitialized.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtoinitializeportsge.1.5‐7:

D2(su)->set pwa initialize ge.1.5-7

set pwa quietperiod

Usethiscommandtosettheamountoftimeaportwillremainintheheldstateafterauser

unsuccessfullyattemptstologontothenetwork.

Syntax

set pwa quietperiod time [port-string]

Parameters

port‐string (Optional)Initializesspecificport(s).Foradetaileddescriptionofpossible

port‐stringvalues,referto“PortStringSyntax UsedintheCLI”on

page 4‐1.

time Specifiesquiettimeinseconds.

port‐string (Optional)Setsthequietperiodforspecificport(s).Foradetailed

descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed

intheCLI”onpage 4‐1.