Enterasys Networks D2G124-12P Manual

A SERVICE OF

next previous

clear eapol

15-18 Security Configuration

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Examples

ThisexampleshowshowtoenableEAPOL:

D2(su)->set eapol enable

ThisexampleshowshowtoenableEAPOLwithforcedauthorizedmodeonportge.1.1:

D2(su)->set eapol auth-mode forced-auth ge.1.1

clear eapol

UsethiscommandtogloballycleartheEAPOLauthenticationmode,ortoclearsettingsforoneor

moreports.

Syntax

clear eapol [auth-mode] [port-string]

Parameters

Defaults

Ifauth‐modeisnotspecified,allEAPOLsettingswillbecleared.

Ifport‐stringisnotspecified,settingswillbeclearedforallports.

enable|disable EnablesordisablesEAPOL.

auth‐mode

auto|

forced‐auth|

forced‐unauth

Specifiestheauthenticationmodeas:

• auto‐Autoauthorizationmode.Thisisthedefault

modeandwill

forwardframesaccordingtotheauthenticationstateoftheport.For

detailsonthismode,refertoTable 15‐47.

• forced‐auth‐Forcedauthorizedmode,whichdisablesauthentication

ontheport.

• forced‐unauth‐Forcedunauthorizedmode,whichfiltersanddiscards

allframesreceivedontheport.

port‐string

Specifiestheport(s)onwhichtosetEAPOLparameters.Foradetailed

descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed

intheCLI”onpage 4‐1.

auth‐mode (Optional)GloballyclearstheEAPOLauthenticationmode.

port‐string Specifiestheport(s)onwhichtoclearEAPOLparameters.Foradetailed

descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed

intheCLI”onpage 4‐1.