Enterasys Networks D2G124-12P Manual

A SERVICE OF

next previous

disconnect

12-14 Logging and Network Management

Mode

Switchcommand,read‐only.

Example

Thisexampleshowshowtousetheshowuserscommand.Inthisoutput,therearetwoTelnet

usersloggedinwithRead‐Writeaccesspriv ilegesfromIPaddresses134.141.192.119and

134.141.192.18:

D2(su)->show users

Session User Location

-------- ----- --------------------------

* telnet rw 134.141.192.119

telnet rw 134.141.192.18

disconnect

UsethiscommandtocloseanactiveconsoleportorTelnetsessionfromtheswitchCLI.

Syntax

disconnect {ip-addr | console}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Examples

ThisexampleshowshowtocloseaTelnetsessiontohost134.141.192.119:

D2(su)->disconnect 134.141.192.119

Thisexampleshowshowtoclosethecurrentconsolesession:

D2(su)->disconnect console

ip‐addr SpecifiestheIPaddressoftheTelnetsessiontobedisconnected.This

addressisdisplayedintheoutputshownin“showusers”onpage 12‐15.

console Closesanactiveconsoleport.