Configuring the Network
DHCP (the default) will boot up and run properly without a shared secret configured, but Access
Controllers will not be able to communicate with it. In this case, you must edit the Access Control
Server configuration to add a shared secret to enable the Access Control Server to manage its
associated Access Controllers. See
—The Access Control Server Shared Secret“ on page 6-7 for
more information about the shared secret.
» To
System Components List, or click the pencil icon (
edit an Access Control Server configuration, click on the name of the Access Control Server in the
) to the far right of the Access Control Server.
The Edit Access Control Server page appears as shown in Figure 6-3.
Figure 6-3. Edit Access Control Server page
The fields on the Edit Access Control Server page show the current setting for the Access Control Server.
You can modify any of these values, except the IP address and MAC Address, which are read-only fields.
6-4 HP ProCurve Secure Access 700wl Series Management and Configuration Guide
