Command Line Interface
show clients [mac <mac-address>] [sort {mac | ip | user | machine | port | sessions | idle} ] [reverse]
Lists all active clients. You can optionally sort the list by a number of criteria.
<mac-address> MAC (Ethernet) address to display. Specified in the format:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx (colons are optional).
sort Sort the clients according to one of the following criteria (one must be
specified):
• mac: by MAC address
• ip: by IP address
• user: by user name
• machine: by machine name. (Note that some clients, such as Apple
systems, may allow special characters in their names, and these may be
displayed differently in this list.)
• port: by Access Manage port
• sessions: by number of running sessions
• idle: by idle time duration
reverse Keyword that reverses the order of the display, which normally displays the
most recent events first (in ascending order).
show client mac <mac> [ rights ]
Lists active sessions for a client. Shows client rights if requested.
mac <mac>, where mac is the (Ethernet) address to display. Specified in the
format:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx (colons are optional).
rights Keyword that specifies that the XML that defines the client rights should be
included in the display.
The following command:
show client mac 00:00:86:5a:78:18 rights
Produced the following output:
User: ann
Machine name: ANNMCC-MOBILE
MAC address: 00:00:86:5a:78:18
IP address: 42.23.184.102
Address status: NAT mode: rights do not allow use of non-NAT IP address
Access Controller: 10.205.2.25
Slot/Port: 3/1
Client Rights
These rights expire in 48 mins, 43 secs:
<?xml version="1.0" standalone="yes"?>
<client_rights>
<expiry>2923</expiry>
<id>ann</id>
<allow_real_ip>False</allow_real_ip>
<allow_static_ip>False</allow_static_ip>
<ip_addr_policy>do_nat</ip_addr_policy>
<encryption_required>False</encryption_required>
<ipsec>
A-24 HP ProCurve Secure Access 700wl Series Management and Configuration Guide
