A SERVICE OF

logo

Configuring the Network
Network Communication–the Basic Setup Tab
To configure the basic network communication settings for a 700wl Series system component, do the
following:
Step 1. Under the network icon, click the Network Setup tab to display the Basic Setup tab, as shown in
Figure 6-8.
Figure 6-8. Network Setup: Basic Setup page for an Access Control Server
Step 2. In the System Components List at the left, select the component you want to configure. If you
have a redundant peer configured, there may be two Access Control Servers shown.
The fields that appear on the Basic Setup page are slightly different depending on whether the
component is an Access Control Server, Integrated Access Manager, or Access Controller.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 6-19