A SERVICE OF

logo

Open as PDF
next previous
Configuring the Network
Figure 6-16. Example of a Port Connection Type selection list
To configure a port for a specific connection type, do the following:
Step 1. On the Interfaces setup page select the Access Controller to configure.
Step 2. Click the Speed/Duplex tab.
The Speed/Duplex page for Access Controllers appears. See Figure 6-17.
Figure 6-17. Interfaces: Speed/Duplex Page
Step 3.
Select the connection type from the list provided in the drop-down list.
HP ProCurve Secure Access 700wl Series Management and Configuration Guide 6-35