A SERVICE OF

logo

FCO
2 Screws
Bracket
Phillips
Screwdrive
r
Figure 4-3 Remove the Bracket Before Attaching the FCO to TLS-4212 and 4222 Libraries
Phillips Screws (6)
Do not remove
these screws
Do not remove
these screws
Figure 4-4 Service Panel
4. Place the lower lip of the FCO inside the bottom edge of the service panel open-
ing and tilt the FCO upwards, making sure that the heatsink panel screws align
with the openings in the FCO. See Figure 4-5. The hinge surfaces should rest flat
against the rear of the library.
501440 Rev. G 4-4 FCO Type A Installation