3Com 2226 PLUS Switch User Manual


 
Configuring VLANs 43
VLAN
Click Device, then VLAN on the menu. A screen
appears with seven tabs that include:
Setup
Modify VLAN
Modify Port
Rename
Remove
Port Detail
VLAN Detail
Setup
Use the Setup screen to create VLANs on the
Switch. To propagate information about VLAN
groups used on this Switch to external devices,
you must specify a VLAN ID for each VLAN.
Figure 24 Setup Screen
Available option on the Setup screen include:
VLAN ID – ID of configured VLAN (1-4094,
no leading zeroes)
For examples on setting up VLANs, refer to
Sample VLAN Configurations.
CAUTION: At least one port must always be an
untagged member of VLAN 1 (the
management VLAN). If you choose to connect
all ports to VLANs other than VLAN 1, you will
no longer be able to access the Web interface.
If this happens, you will need to reset the
Switch to factory settings.