3Com PS Hub 40 Switch User Manual


 
2 A
BOUT
T
HIS
G
UIDE
How to Use
This Guide
This table shows where to find specific information in this guide.
Conventions
Table 1 and Table 2 list conventions that are used throughout this
guide.
If you are looking for... Turn to...
An introduction to the hub, workgrouping and segments Chapter 1
Information on how the PS Hub 40 and PS Hub 50 are different
from each other
Chapter 2
Information on installing and using the hub Chapter 3
An introduction to load balancing and how it works Chapter 4
Ways you can manage the hub and how to start your
management session
Chapter 5
Information on using the Command Line Interface to set up
the hub for management
Chapter 6
Information on using the web interface to manage the hub or
stack of hubs
Chapter 7
Information on
solving any problems
Chapter 8
The hub’s dimensions, the standards it conforms to, and the
cabling you can use with it
Appendix A
Information on using Quick Config Manager to manage the hub
or stack of hubs
Appendix B
Information on installing and using the serial web utility Appendix C
Information on using the agent upgrade utility Appendix D
Technical support Appendix E
Table 1
Notice Icons
Icon Notice Type Alerts you to...
Information note Important features or instructions
Caution Risk of system damage, loss of data, or to personal
safety.
Warning Risk of severe personal injury