Configuring the 3C882 ISDN Modem for a PC 3-2
Installing the 3C882 Software
To install the 3C882 ISDN modem software:
1 Insert the 3ComImpact IQ Windows & DOS Installation
Diagnostic Utilities diskette into an available floppy drive.
2 If you are using Windows 95, select Run from the Start
menu. If you are using Windows 3.x, select Run from the File
menu. In the Run dialog box shown in Figure 3-2, type:
a:\setup
Figure 3-2 Run Dialog Box
3 Click OK.
After the configuration program is copied to the hard disk.,
the readme file opens. Review the information and then
close the file. A message confirms installation is complete.
If you are running Windows 3.x, a message box appears and
asks you whether you want to install a COM port
enhancement driver for data transfer rates up to 115.2 Kbps.
This driver will replace your existing COM port driver.