Configuring the 3C882 ISDN Modem for a Macintosh Computer 4-9
The Configuration dialog box buttons do the following.
Update Configuration. Click Update Configuration to
download parameter changes to your ISDN modem’s
S registers.
Update Firmware. Refer to the readme file for firmware
download instructions.
Diagnostics. Use the Diagnostics tool only under the
direction of technical support personnel.
Quit. Click Quit to leave the Configuration dialog box.
Configuring Multilink PPP
Multilink PPP is a protocol which provides a method for
combining multiple PPP connections. Multilink PPP combines
the two ISDN B channels, creating a virtual single digital
connection of up to 128 Kbps. Note that the destination you
are dialing must also support Multilink PPP, or the
dual-channel link will not occur and you will get a single
B channel connection.
By default, Multilink PPP is enabled. To enable or disable
Multilink PPP, do the following:
1 Click inside the Multilink check box in the PPP area to
clear it (disable) or check it (enable).
2 Click the Update Configuration button to download the
change to your 3C882 ISDN modem’s S register.
Additional configuration may be needed for Multilink PPP. For
details refer to S registers 82 and 83 in Appendix B.