S Registers B-6
S63
*
Voice Call Routing (bit map)
0 — Calls to either analog port are blocked
1 — Phone #1 to Phone port 1 only; Phone #2 calls blocked
2 — Phone #1 to Phone port 2 only; Phone #2 calls blocked
3 — Phone #1 to Phone port 1 or 2; Phone #2 calls blocked
4 — Phone #1 calls blocked; Phone #2 to Phone port 1 only
5 — Phone #1 to Phone port 1 only; Phone #2 to Phone port 1 only
6 — Phone #1 to Phone port 2 only; Phone #2 to Phone port 1 only
7 — Phone #1 to Phone port 1 or 2; Phone #2 to Phone port 1 only
8 — Phone #1 calls blocked; Phone #2 to Phone port 2 only
9 — Phone #1 to Phone port 1 only; Phone #2 to Phone port 2 only
10 — Phone #1 to Phone port 2 only; Phone #2 to Phone port 2 only
11 — Phone #1 to Phone port 1 or 2; Phone #2 to Phone port 2 only
12 — Phone #1 calls blocked; Phone #2 to Phone port 1 or 2
13 — Phone #1 to Phone port 1 only; Phone #2 to Phone port 1 or 2
14 — Phone #1 to Phone port 2 only; Phone #2 to Phone port 1 or 2
15 — Phone #1 to Phone port 1 or 2; Phone #2 to Phone port 1 or 2
(default)
S65 ISDN Caller ID for Voice Calls for Phone Port 1:
Displays the phone number of an incoming voice call over phone port 1.
This field is read-only.
S66 ISDN Caller ID for Voice Calls for Phone Port 2:
Displays the phone number of an incoming voice call over phone port 2.
This field is read-only.
S67 ISDN Caller ID for Data Calls:
Displays the phone number of an incoming data call. This field is read-only.
S70
*
Dynamic Bandwidth Allocation (DBA):
0 — DBA disabled
1 — DBA enabled (default)
(continued)
Table B-2 S Registers (continued)
Registers Descriptions