Filter
Top Products
Configuring the 3C882 ISDN Modem for a PC 3-3
Running SPID Wizard
The SPID Wizard automatically detects your telephone
company’s switch type and configures the SPID(s).
You will need the ISDN telephone numbers from the ISDN
Information Sheet you completed in Chapter 1.
1 Double-click the 3ComImpact IQ 3.0 icon shown in
Figure 3-3.
Figure 3-3 3ComImpact IQ Globe Icon
You will see a start message, as shown in Figure 3-4.
Figure 3-4 SPID Wizard Start Message for PC
If you do not want to run the SPID Wizard, click Cancel. The
Configuration dialog box appears (see Figure 3-8). Select your
ISDN switch type, and then enter the telephone number(s)
and, if required, enter the corresponding SPID(s) for your ISDN
line. Refer to the section “Configuring Multilink PPP”.