Filter
Top Products
Configuring the 3C882 ISDN Modem for a Macintosh Computer 4-12
Note that while you are using the fax machine, for example,
you cannot use the telephone to place or receive calls
because your ISDN line has only one telephone number.
To change the voice call routing setting:
1 Specify which Phone port should handle the calls
associated with Telephone Number 1.
2 If your ISDN line has two telephone numbers, specify
which Phone port should handle the calls associated with
Telephone Number 2.
3 Click the Update Configuration button to download the
change to your 3C882 ISDN modem’s S register
Verifying the Configuration
Check the status bar located toward the bottom of the
Configuration dialog box to verify correct configuration. If the
parameters were configured accurately and the 3C882 ISDN
modem is ready to send and receive calls, the status bar
fields will appear as shown here.
The TEI number(s) are not configured by the user. The TEI
number(s) are provided by the telephone company for
informational purposes only.
■ Layer 1: UP
■ SPID 1: Init (if required)
■ TEI 1: Number from 64 to 126
■ SPID 2: Init (if required)
■ TEI 2: Number from 64 to 126 (if required)