Filter
Top Products
24
Figure 11 Welcome Screen
If the Wizard does not launch automatically (this may occur if the
Gateway has been powered up or configured previously) you can
launch the Wizard manually.
5 To launch the Wizard manually click on the Setup Wizard tab in
the welcome screen followed by the WIZARD... button.
Figure 12 Wizard Screen
Click Next to continue.
You will now be guided through the setup of your Gateway.
Setting the Password
When the Change Administration Password screen (Figure 13)
appears, type the Old Password, then a new password in both
the New Password and Confirm Password fields.
The default password for the Gateway is ‘admin’. It is case
sensitive and must be entered as the Old Password the first time
you configure the Gateway. 3Com recommends that you change
the password from its default value.
dua08 569-5aaa02.book Pag e 24 Thursday , Novem ber 7 , 2002 3:09 PM