3Com 3CR856-95 Network Router User Manual


 
48
PC Privileges allows you to assign different access rights for
different computers on your network, restricting this access and
controlling your users’ access to outside resources.
To use access control for all computers:
1 Click the Control PC Access to the Internet radio button.
2 Click on All PCs to setup the access rights for all computers
connected to the Gateway.
3 Check the box of a service to authorize it. Clear the box to deny
the service. See Figure 45
.
Figure 45 All PCs Setup Screen
4 Either:
Enter the additional services that you wish to allow in the
except (specify ports) box and set the drop down box to
Allow.
Enter the services that you wish to deny in the except (specify
ports) box and set the drop down box to Deny.
Enter multiple ports as either a comma separated list e.g. 101,
105, 107, or as a range, e.g. 101-107.
5 Click Apply to save the settings.
To assign different access rights for different computers:
1 Click the Control PC Access to the Internet radio button.
2 Click New to display the PC Privileges setting screen.
3 Enter the IP address of the computer in the PC’s IP Address text
box.
4 Check the box of a service to authorize it. Clear the box to deny
the service. See Figure 46
.
Figure 46 PC Privileges Setup Screen
dua08 569-5aaa02.book Pag e 48 Thursday , Novem ber 7 , 2002 3:09 PM