Filter
Top Products
60
Click Apply to save your changes or Close to return without
saving. When you have created a user account the user will need
to know in order to enable connection.
PPTP Connections
If you have selected PPTP as a Tunnel Type, enter the following:
■ Password — The Password that the user will need to supply
to connect. (Figure 56
)
When you have created a user account the user will need to
know the User Name and Password you have given them.
Figure 56 PPTP Connections
The screens to edit and add a PPTP user contain the same fields.
Click Apply to save your changes or Close to return without
saving.
Editing IPSec Routes
This screen allows you to add and replace networks in the
existing IPSec Route. See Figure 57
To do this:
1 Select edit to display the Edit Route screen. (Figure 58).
2 Click in the table and add a new Network and Subnet Mask
entry.
3 Click Apply to save your changes or Close to return without
saving.
The gateway for a remote network must also be set to use the
VPN tunnel to access your local network. Therefore, if you
include a subnet for a remote network in your IPSec route then
the remote network must also include your subnet in its IPSec
route also.
dua08 569-5aaa02.book Pag e 60 Thursday , Novem ber 7 , 2002 3:09 PM