3Com 3CR856-95 Network Router User Manual


 
44
Figure 38 One-to-Many and One-to-One NAT Figure 39 Network Address Translation Screen
Setting up One-to-Many NAT
This is very easy to set up and the Gateway’s default mode. It
works with any IP Allocation Mode and will map all the
addresses on your LAN to the Internet address of your Gateway.
To set up One-to-Many NAT:
1 Select One-to-Many NAT from the NAT Mode drop-down box.
2 Click Apply to save your changes.
192.168.1.100
172.16.57.52
192.168.1.101
172.16.57.53
192.168.1.102
172.16.57.54
192.168.1.100
192.168.1.101
172.16.57.52
192.168.1.102
One-to-Many NAT
One-to-One NAT
dua08 569-5aaa02.book Pag e 44 Thursday , Novem ber 7 , 2002 3:09 PM