Filter
Top Products
114 CHAPTER 6: CONFIGURING PORTS
Viewing Port Settings The Port Administration Summary Page permits the network manager to
view current port configuration information.
To view Port Settings:
1 Click Port > Administration > Summary. The Port Administration
Summary Page opens:
Figure 58 Port Administration Summary Page
The Port Administration Summary Page contains the following fields:
■ Port — Indicates the selected port number.
■ State — Shows if the interface is enabled or disabled.
■ Flow Control — Displays the flow control status on the port.
Operates when the port is in full duplex mode. The possible field
values are:
■ Enabled — Enables flow control on the port.
■ Disabled — Disables flow control on the port.
■ Speed — Displays the configured rate for the port. The port type
determines what speed setting options are available. The possible field
values are:
■ 10M — Indicates the port is currently operating at 10 Mbps.
■ 100M — Indicates the port is currently operating at 100 Mbps.
■ 1000M — Indicates the port is currently operating at 1000 Mbps.
■ Auto — Indicates that port speed is set to an optimal value based
on advertised capabilities.