3Com 3CRWDR101B-75 Network Router User Manual


 
34 CHAPTER 4: RUNNING THE SETUP WIZARD
Bridge Mode (for a single PC)
To set up the Router for use with an RFC1483 bridged connection, use
the following procedure:
Figure 21 Bridged Mode Screen
1 Enter your VPI and VCI information in the VPI/VCI fields.
2 Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down menu. This information should be provided to you by your ISP.
3 Check all of your settings, and then click Next.
The LAN Settings screen will then be displayed (refer to Figure 24
).
Routing Mode over ATM
To set up the Router for use with an RFC1483 routed connection, use the
following procedure:
Figure 22 Routing Mode Screen