Filter
Top Products
Internet Settings 55
PPPoE
PPP over Ethernet, provides routing for multiple PCs. To configure this
function correctly, you should obtain the information from your ISP.
Figure 45 PPPoE Settings Screen
1 Select PPPoE from the Protocol drop-down menu.
2 Enter the IP address and Subnet Mask information provided by your ISP
into the IP address and Subnet Mask fields.
3 Enter the user name assigned to you by your ISP in the Username field.
And enter the password assigned to you by your ISP in the Password field.
Re-enter your password in the Confirm Password field.
4 Select the connection type from the Connect Type drop-down menu.
■ Always Connected means that Internet connection to your ISP is
always on.
■ Auto - Triggered by Traffic means your Router will automatically
connect to your ISP every time a PC needs to access the Internet.
■ Manual - Start in Disconnected means that after re-booting the
Router, the Internet connection will need to be re-established
manually by the user.
■ Manual - Start in Connected means that after re-booting the
Router, it will automatically establish a connection to your ISP.