Internet Settings 61
Routing Mode over ATM (RFC 1483 Routed Mode)
This mode is commonly used with either dynamic or static IP addressing.
In this mode the WAN ADSL port will be configured with an IP address
provided by the ISP. To configure the settings correctly, you should obtain
the information on this screen from your ISP.
Figure 48 Routing Mode over ATM Screen
1 Select Routing Mode over ATM from the Protocol drop-down menu.
2 Enter the IP address, Subnet Mask and Default Gateway information
provided by your ISP into the IP address, Subnet Mask and Default
Gateway fields.
3 Check the DNS Automatic from ISP checkbox, if your ISP automatically
configure DNS. However, if you need to configure DNS manually, enter
the IP address in the DNS Address field. (If your ISP uses a secondary DNS,
enter the IP address in the Secondary DNS Address field).
4 Enter the host name in the Host Name filed.
5 If your ISP uses DHCP to automatically assign IP addresses, check the
DHCP Client checkbox.
6 Enter the VPI and VCI parameters provided to you by your ISP in the VPI
and VCI fields. You can click Auto Search to automatically find out this
information.
7 Select the encapsulation type (LLC or VC MUX) in the Encapsulation field.
This information should be provided to you by your ISP.