Filter
Top Products
36 CHAPTER 4: RUNNING THE SETUP WIZARD
To assign a fixed IP address:
1 Enter your Internet IP address in the WAN IP field.
2 Enter the subnet mask in the Subnet Mask field.
3 Enter the default gateway IP address in the Default Gateway field.
4 Enter the DNS address in the DNS field.
5 Enter your VPI and VCI information in the VPI/VCI text boxes.
6 Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down menu. This information should be provided to you by your ISP.
7 Check all of your settings, and then click Next.
The LAN Settings screen will then be displayed (refer to Figure 24
).
Setup Wizard - LAN
Settings
The LAN Settings screen allows you to set the default IP address and
DHCP client IP range for the Router.
Figure 24 The LAN Settings Screen
1 To change the Router’s default IP address, enter the new IP address in the
IP Address field, and then enter the subnet mask in the Subnet Mask
field.
2 Select the On/Off button to turn on/turn off the DHCP function in the
DHCP Server field.
3 Enter the client IP address range in the IP Pool Start Address and IP Pool
End Address fields.
4 Click Next. The Wireless Settings screen will be displayed (refer to
Figure 25
).