Filter
Top Products
Unpacking the Module
To unpack the 6412M-25-TP module, follow these steps:
1. Verify that the 6412M-25-TP module is the correct model by matching the model
number listed on the side of the shipping carton to the model number you ordered.
Note: The product model number printed on the shipping box differs from the
model number on the product. The model number on the shipping box bears the
prefix 3C9.
2. Remove the module from its shipping carton.
3. Remove the 6412M-25-TP module from its anti-static bags and inspect it for
damage. Always handle it by the edges, being careful not to touch the internal
components.
If the module appears to be damaged, put it back in the anti-static bag, put the bag
back into the shipping carton, then contact your local 3Com dealer.
It is recommended that you retain the shipping carton and the anti-static shielding bag
in which the module was delivered. These can be reused later if you want to repackage
the components for storage or shipment.
2-2 25 Mbps ATM Module - Installation and User's Guide