Filter
Top Products
Port Information
To display status information about the ports of an 6412M-25-TP module, use the
SHOW PORT command.
The following example shows how to display detailed information about port 1 of the
6412M-25-TP module in slot 1:
ONcoreATM> show port 1.1 verbose
Port display for ONcore 12-Port 25 Mbps ATM I/O Module
Type Mode Status
------------------------------------------------------------------------------
1. 1:UNI enabled UP-NO ACTIVITY
Signalling Version : with ILMI
Flow Control : Off
Connector : RJ45
Media : copper twisted pair
Remote device is active
IX status : IX OK
Port speed : 256 Kbps
ONcoreATM>
For more information on the SHOW PORT command, see the Command Reference
Guide.
Saving Configuration Settings
After configuring the 6412M-25-TP module and port settings, save the settings by
entering the SAVE MODULE_PORT command.
Chapter 3. Configuration 3-5