Filter
Top Products
New Features and Feature Enhancements 21
message identifier(s) and /or SYSLOG server. The action to send all messages to
the SYSLOG server is still the default when auditing is enabled.
■ The audit log messages can also be sent out through an SNMP trap to be
received by the configured SNMP trap manager(s).
Domain Name Use in FTP and TFTP Commands
Starting with 11.4, a domain name can be used in the FTP commands of GET and
PUT, as well as the TFTP command of COpy to specify the name of the FTP or TFTP
server. Previously, only the IP address of the FTP or TFTP server could be used for
these commands. This function assumes that there is a Domain Name server on
the network with the name/address mapping configured; the Enterprise OS device
continues to act only as a FTP/TFTP client.
Transcend VPN
Application Suite
With more VPN management applications available and planned for the future,
Secure VPN Manager and the new PKI Manager tools have been bundled
together–one part number to use for ordering, one CD-ROM to use for
installation. The new package will be called Transcend VPN Application Suite.
Secure VPN Manager version 2.2
Secure VPN Manager is a graphical web-based network management tool that
presents key information about your virtual private network (VPN). Secure VPN
Manager provides the assistance necessary to monitor the VPN tunnels terminated
by the NETBuilder bridge/router or the PathBuilder S5xx series of devices. These
analyses are possible through the monitoring of the VPN tunnel established for
remote access (client-to-LAN) connections) and site-to-site (LAN-to-LAN)
connections. The application is supported only on the Windows NT Server
platform currently.
Secure VPN Manager supports the following Microsoft devices as tunnel initiators:
■ Window 95 with Microsoft Windows 95 Dial-Up Networking 1.3 Upgrade or
later
■ Window NT with Service Pack 3 and above
Secure VPN Manager supports the following 3Com devices as tunnel initiators and
tunnel terminators:
■ PathBuilder S5xx series devices running software version 11.3 or later
■ NETBuilder bridge/routers running software version 11.3 or later
■ PathBuilder S400 series devices software version 11.4 or later
PKI Manager version 1.0
PKI Manager is a graphical, management application to aid Enterprise OS devices
in obtaining PKI certificates and Certificate Revocation Lists (CRLs) from various
Certificate Authorities (CAs). PKI Manager works as a proxy between the device
and the CA. It is responsible for collecting the certificate requests from the devices
and generating the CA-specific certificate request syntax (CRS), which in turn is
sent to the CA. Once the CA issues the certificate, PKI Manager will retrieve it
from the CA and send it to the Enterprise OS device. The CAs that are supported
with this first release are Verisign and Entrust. The application is supported only on
the Windows NT Server platform currently.