Filter
Top Products
26
SuperStack II
NETBuilder SI
SuperStack II NETBuilder SI bridge/routers are supported with the following
packages:
■ BF– Boundary Router
■ NW–IP/IPX/AT Router
■ NE– IP/IPX/AT Router with 56-bit Encryption
■ NS–IP/IPX/AT Router with 128-bit Encryption and 3DES
■ CF–Multiprotocol Router]
■ CL–Multiprotocol Router with 40-bit Encryption
■ CE–Multiprotocol Router with 56-bit Encryption
■ CS–Multiprotocol Router with 128-bit Encryption and 3DES
■ AX–APPN/Connection Services
Table 3 lists the software features of each package for SuperStack II SI
bridge/routers.
Table 3 SuperStack II NETBuilder SI Software Features
Software Packages
Feature
BF NW NE NS CF CL CE CS AX
Voice Support (Analog)
FXO
FXS
Voice/FAX over IP
Voice/FAX over Frame Relay
Core Features* X X X X X X X X
Boundary Routing
®
central node X X X X
Boundary Routing leaf node X
40-Bit Encryption (IPSec) X X X X X
56-Bit Encryption (IP Sec) X X X X
128-Bit Encryption (IP Sec) X X
IPCP X X X X X X X X
IPv6/BGP X X X X
VRRP (Ethernet/FDDI/Token Ring) X X X X X X X X
VRRP for DLSW X X X X X
VRRP over VLAN X X X X X X X
RSVP, RSVP Proxy X X X X X X X X
Multicast IP, PIM, IGMP, MBR X X X X X X X X
IP/OSI Connection Services
IPX X X X X X X X X
XNS, OSI X X X X X
Appletalk X X X X X X X X
VINES, DECnet, Ph-IV, Ph-IV/V GW X X X X
* Core Features include: Bridging (MLN & SRTG in NBII), Telnet, RADIUS Authentication, IP RIP, IP RIPv2/NTP, FTP, TFTP, HTTP
Server/Web Link/Web Link Health Monitor/ HTTP client, PPP (PAP/CHAP), MLP, CCP, X.25, Dial, ASCII Boot and ASCII Capture, Login Banner,
SLAMS, Bandwidth on Demand/incoming, SLAM Autotargeting, Domain Name Support, NHRP for IP tunnels.