Filter
Top Products
11.4 Software Packages 25
NETBuilder II Firmware Requirements
The NETBuilder II I/O modules require firmware upgrades to support the Enterprise
OS software version 11.4 (see Table 2 for firmware requirements).
You can determine your I/O module firmware version through the software by
entering:
SHow -SYS IOI
MS-CHAP X X X
EAP Authentication X X X X
VPN/PPTP/L2TP/L2TP (FP) Tunnel
Switch PPTP/L2TP (R2R, VLL)
X X X X X
IP (Routing, FireWall, NAT, Proxy,
ARP, DHCP, DHCP Proxy, Traffic
Director, Internal IP Ports, IPQoS)
X X X X X
IP OSPF X X X X X
IPX NLSP X X X X X
Virtual Ports 512 512 512 512 512
Restricted Number of DHCP
Addresses
Max Physical Voice Ports
Max Physical Data Ports 128 128 128 128 128
Memory Requirements
DRAM
40/80 MB 40/80 MB 40/80 MB 40/80 MB 40/80 MB
Flash memory (Minimum required
for Enterprise OS 11.4)
10 MB 10 MB 10 MB 10 MB 10 MB
Flash memory (Minimum required
for Dual Images)
20 MB 20 MB 20 MB 20 MB 20 MB
Table 2 NETBuilder II Firmware Requirements
Module 11.4 Firmware Version Strings
DPE FW/DPE-BOOT1,1.7
FW/DPE-BOOT2,1.7
MP Ethernet 6-port FW/6ETH-FW,1.4.0.70
Fast Ethernet 100Base FW/ETH100-FW,1.9
8-port HSS BRI FW/8BRI-FW,1.5
MP ATMLink FW/ATM-FW,1.1.0.70
HSS 3-port (V.35) FW/HSS3-V35,1.1.11
HSS 3-port (RS-449) FW/HSS3-449,1.1.11
HSS 3-port (RS-232) FW/HSS3-232,1.1.11
HSS 4-port FW/4PORTWAN-FW,1.5
Table 1 NETBuilder II Software Features (continued)
Software Packages
Feature
AC DW DL DE DS
* Core Features include: Bridging (MLN & SRTG in NBII), Telnet, RADIUS Authentication, IP RIP, IP
RIPv2/NTP, FTP, TFTP, HTTP Server/Web Link/ Web Link Health Monitor/ HTTP client, PPP (PAP/CHAP),
MLP, CCP, X.25, Dial, ASCII Boot and ASCII Capture, Login Banner, SLAMS, Bandwidth on
Demand/incoming, SLAM Autotargeting, Domain Name Support, NHRP for IP tunnels.