Filter
Top Products
32
PathBuilder S400 Series
Switches
The PathBuilder S400 series switches support the following software packages:
■ XW–IP/IPX/AT Data/Voice Router
■ XE–IP/IPX/AT Data/Voice Router with 56-bit Encryption
■ XL–IP/IPX/AT Data/Voice Router with 40-bit Encryption
■ XS-IP/IPX/AT Data/Voice Router with 128-bit Encryption and 3DES
■ MW–Multiprotocol Data/Voice Router
■ ME–Multiprotocol Router with 56-bit Encryption
■ ML–Multiprotocol Router with 40-bit Encryption
■ MS–Multiprotocol Router with 128-bit Encryption and 3DES
Table 5 lists the software features in each package for the PathBuilder S400 series
switches.
Table 5 PathBuilder S400 Series Switches Software Features
Software Package
Feature
XW XL XE XS MW ML ME MS
Voice Support (Analog) X X X X X X X X
FXO X X X X X X X X
FXS X X X X X X X X
Voice/FAX over IP X X X X X X X X
Voice/FAX over Frame Relay X X X X X X X X
Core Features* X X X X X X X X
Boundary Routing
®
central node X X X X
Boundary Routing leaf node
40-Bit Encryption (IPSec) X X X X X
56-Bit Encryption (IP Sec) X X X X
128-Bit Encryption (IP Sec) X X
IPCP X X X X X X X X
IPv6/BGP X X X X
VRRP (Ethernet/FDDI/Token Ring) X X X X X X X X
VRRP for DLSW X X X X
VRRP over VLAN X X X X X X X X
RSVP, RSVP Proxy X X X X X X X X
Multicast IP, PIM, IGMP, MBR X X X X X X X X
IP/OSI Connection Services
IPX X X X X X X X X
XNS, OSI X X X X
Appletalk X X X X X X X X
VINES, DECnet, Ph-IV, Ph-IV/V GW X X X X
DLSW X X X X
NetView Service Point X X X X
* Core Features include: Bridging (MLN & SRTG in NBII), Telnet, RADIUS Authentication, IP RIP, IP RIPv2/NTP, FTP, TFTP, HTTP
Server/Web Link/Web Link Health Monitor/ HTTP client, PPP (PAP/CHAP), MLP, CCP, X.25, Dial, ASCII Boot and ASCII Capture, Login Banner,
SLAMS, Bandwidth on Demand/incoming, SLAM Autotargeting, Domain Name Support, NHRP for IP tunnels.