Filter
Top Products
82 CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS
Using the List Card
Menu
The List Card menu, shown in Figure 51, lists the shelf and all installed interfaces.
To display the List Card menu follow these steps:
1 From the Main menu select [2] Configuration Management.
2 From the Configuration Management menu, select [1] Manage Card.
Select [0] Shelf from the List Card menu to view configuration information for the
shelf. The Shelf Configuration screen is a read-only screen that displays the
Hardware Revision and Serial Number.
The remaining options (1 and above) on the List Card menu display menus that
allow you to configure specific modules and ports. The following sections tell you
how to perform the specific configurations available from the List Card menu.
Figure 51 List Card Menu
Configuring the
Management CPU
MCPU configuration involves viewing configuration information and managing
shapers. To display the MCPU Menu, follow these steps:
1 From the Configuration Management menu, select [1] Manage Card to display the
List Card menu.
2 Select [1] MCPU to display the MCPU Configuration menu, shown in Figure 54.
From the MCPU Card menu, you access the submenus and screens from which
you view configuration information and configure shapers, as described in the
following subsections.