Filter
Top Products
Configuring Span Lines 1 and 2
2-5
Menu Option 8 Mapping the span line’s DS0s to chassis modems
The Total Control chassis contains 17 NAC slots. Two typical chassis
configurations are:
■
Configuration 1
■
Slot 1: T1/PRI Card
■
Slots 2–16: Quad Modem or Quad I-modem Cards
■
Slot 17: Network Management Card
■
Configuration 2
■
Slot 1: T1/PRI Card
■
Slots 2–15: Quad Modem/Quad I-modem Cards
■
Slot 16: NETServer or NETServer PRI Card
■
Slot 17: Network Management Card
Each of the slots populated by a Quad Modem Card contains four
modem channels numbered sequentially 1–4 from top to bottom.
This option allows you to map span line time slots to these modem
channels.
Use the following syntax when configuring this option:
DS0#:sl#/ch#
Where:
DS0#
= DS0 number (1–23)
sl#
= Chassis modem slot number (1–16)
ch#
= Chassis modem channel number (1–4)
When a modem is moved to a DS0, the DS0 it was associated with prior
to the move becomes unmapped.