Filter
Top Products
Configuring Software Fault Event Logging
2-17
Menu Option 9 Companding Code Configuration
Companding is the process of compressing a signal’s amplitude for
transmission and then expanding it back to its original form at the
receiving end. It is used to reduce the signal-to-noise ratio on the line.
This option allows you to configure the NAC for one of these
companding modes:
■
A-law
Companding standard used outside of North America.
■
u-law
Companding standard used in Japan and North America.
■
Modem’s Country Code
Default code set on chassis modems establishing what country it is
to be used in.
Configuring
Software Fault
Event Logging
Fault manager Event Logging is not supported in this release.
3Com (c) 1995, 1996, 1997, 1998
Dual T1/PRI Application Card Revision 3.1.4 (Card Id: 27)
Boot Code Linked Date : Mon Dec 04 17:41:48 1995
Operation Code Linked Date: Tue Feb 23 16:41:51 1999
Main Menu
1 Command
2 Status
3 Card Configuration
4 Inbound Call Routing Configuration
5 Span Line 1 Configuration
6 Span Line 2 Configuration
7 SW Fault Manager Event Logging
8 Logout
Enter menu selection and press Return.
Menu Selection (1-8):