Filter
Top Products
Configuring Span Lines 1 and 2
2-7
The following types of cause codes are supported:
Use the following syntax when configuring this option:
CCT:CCV
Where:
CCT
= Cause code type
CCV
= Cause code value (0–127)
Pressing
R
at the prompt resets all codes to the default value of 58.
Configuration changes will take place immediately.
Menu Option 13 Configuring the DS0 level call-type blocking
DS0 level call-type blocking allows specific types of incoming calls to be
rejected when placed on the channel or DS0.
Configure the call-type blocking feature for:
■
All calls (analog and digital) blocked
■
Analog calls blocked
■
Digital calls blocked
■
No calls blocked
Any changes made will take effect on the next call.
Use the following syntax when configuring this option:
BCT:DS0#
(to configure a single DS0)
BCT:DS0#,DS0#,DS#-DS#,...
(to configure multiple DS0s or a
range of DS0s)
Cause Code Type Default Cause Code Value Description
A 58 All calls blocked
B 58 Analog calls blocked
C 58 Digital calls blocked
D 58 No modems available
E 58 No gateway available