Filter
Top Products
Configuring Inbound Call Routing
2-13
Use the following syntax to assign a pool type to a pool ID:
ID:PT
Where:
ID
= pool ID
PT
= pool type (analog, digital, both, none, or clear (clears pool
type and inbound phone #))
CAUTION:
Changing pool types will trigger an automatic update to
device-to-pool mappings that may result in data loss.
Menu Option 7 Mapping chassis modem channels to reserved pools
Once the pool IDs are configured, they must be mapped to modem
channels. This option allows you to do this.
Use the following syntax to assign a pool ID to a modem channel:
ID:MID
(for single assignments)
ID:MID-MID
(for multiple assignments)
Where:
ID
= pool ID (or N (none))
MID
= modem channel ID (1–64), as displayed on the screen
Menu Option 8 Mapping digital reserved pools to chassis Gateways
Once the digital Pool IDs are configured, they must be mapped to chassis
gateways. This option allows you to do this.
Use the following syntax to assign a pool ID to a chassis gateway:
ID:G#
(for single assignments)
ID:G#-G#,G#
(for multiple assignments)
Where:
ID
= pool ID (or N (none))
G#
= chassis slot (index) where gateway is installed