Filter
Top Products
4-22 CHAPTER 4: MICROSOFT WINDOWS ENVIRONMENT
Figure 4-12 3Com Class of Service Setup Window
If an application is not listed in the Supported Applications
tab (Figure 4-12), you can obtain the necessary port or
socket range from the application’s manufacturer, and
manually enter the information in the Additional Ranges
tab (Figure 4-13); or you can set the range to include
all applications.
4 Select the Enable radio button.
The default mode is Disable. When Class of Service is
disabled, you cannot select applications shown in the
Supported Applications Tab for high-priority network
access. In addition, you cannot make changes to data
shown in the Additional Ranges tab and Advanced Options
tab. Selecting Enable gives you access to all three tabs of
the 3Com Class of Service Setup window.
Book Page 22 Saturday, November 1, 1997 3:13 PM