Filter
Top Products
Installing a Driver for Various IBM Environments 5-3
9 Enter the path of the temporary directory for the
OEMSETUP.INF file:
c:\temp
10 The 3Com TokenLink Velocity XL PCI NIC is selected.
Press Enter.
11 Enter the machine ID, user name, and domain name.
12 Press Enter to accept the list of options chosen.
13 Finish installing files from the IBM DOS LAN Services
diskettes.
14 If you are using the 3.5-inch TokenDisk diskettes,
insert TokenDisk diskette #1 in the drive.
15 Copy the microcode file TLNKP.MAC from the
TokenDisk to your hard drive. For example, if you
are using the 3.5-inch TokenDisk diskettes, enter:
copy a:\tlnkp.mac c:\net
If you are using the TokenDisk CD, substitute the
appropriate drive in the microcode file’s path.
This completes the driver installation for IBM DOS LAN
Services. Restart your computer and install your host
connectivity application.
Using IBM MPTS to Install a Driver for OS/2
If your OS/2 network operating system has not yet been
installed on your computer, install it now and follow its
instructions for installing device drivers. If an OS/2 network
operating system has previously been installed, follow the
instructions here for using IBM Multiprotocol Transport
Services (MPTS) to install device drivers.
1 Start IBM MPTS by performing either of the
following actions:
■ From the OS/2 desktop, double-click the MPTS icon.
■ From an OS/2 window, go into the IBMCOM
subdirectory and at the OS/2 prompt, enter:
mpts
2 Select OK on the MPTS logo panel.
Book Page 3 Saturday, November 1, 1997 3:13 PM