Filter
Top Products
5-2 CHAPTER 5: IBM ENVIRONMENTS
6 Insert the IBM LAN Support Program diskette in the
drive when prompted.
The Primary Adapter Driver shown is 3Com TokenLink
Velocity XL PCI.
7 Press F4 to install the driver.
8 If you are using the 3.5-inch TokenDisk diskettes,
insert TokenDisk diskette #1 in the drive when
prompted.
This completes the installation of DXMAID and the DOS
NDIS 2.01 driver. Restart your computer and install your
host connectivity application.
Installing a Driver for IBM DOS LAN Services
Follow these steps to install the NDIS 2.01 driver for IBM DOS
LAN Services for IBM LAN Server 4.0 or IBM Warp Server:
1 Create a temporary directory on your DOS PC. For
example, enter:
mkdir c:\temp
2 If you are using the 3.5-inch diskettes, insert
TokenDisk diskette #2 in the drive. If you are using
the TokenDisk CD, insert it in the CD-ROM drive.
3 Copy the following files from the TokenDisk diskette
to the temporary directory. For example, enter:
copy a:\ndis2\dos\oemsetup.inf c:\temp
copy a:\ndis2\dos\tlnkpn2.dos c:\temp
If you are using the TokenDisk CD, substitute the
appropriate drive in the path.
4 Insert IBM DOS LAN Services diskette #1 in the drive.
5 From the DOS prompt, enter:
a:\install
6 Press Enter when the welcome screen is displayed.
7 Press Enter to accept the default directory C:\NET as
the location to install IBM DOS LAN Services.
8 From the list of network cards presented, select
Network Card Not Shown In List Below.
Book Page 2 Saturday, November 1, 1997 3:13 PM