Filter
Top Products
6-4 CHAPTER 6: TROUBLESHOOTING
Figure 6-2 Test Menu
2 From the Test pull-down menu shown in Figure 6-2,
select Run Tests.
The Run Tests dialog box appears, similar to the one shown
in Figure 6-3.
Figure 6-3 DOS Diagnostic Program Run Tests Dialog Box
3 Press Enter to start the tests.
Each test runs once unless you specify otherwise. The test
results are displayed with “Passed” or “Failed” in the
Results column.
Book Page 4 Saturday, November 1, 1997 3:13 PM