Filter
Top Products
INTRODUCTORY SECTION CHAPTER 3: GETTING STARTED
8E6 TECHNOLOGIES, PROXYBLOCKER USER GUIDE 31
Chapter 3: Getting Started
Initial Setup
To initially set up your ProxyBlocker server, follow the
instructions in the Quick Start Guide, the booklet packaged
with your ProxyBlocker unit. This guide explains how to
perform the initial configuration of the server so that it can
be accessed via an IP address on your network.
NOTE: If you do not have the ProxyBlocker Quick Start Guide,
contact 8e6 Technologies immediately to have a copy sent to
you.
Using the Administrator Console
Log On
1. Launch a browser window supported by the Proxy-
Blocker.
2. In the address line of the browser window, type in the
ProxyBlocker server’s IP address appended by the
following port number:
• “:88” for an HTTP address
• “:1443” for an HTTPS address
For example, if your IP address is 210.10.131.34, type in
http://210.10.131.34:88 or https://210.10.131.34:1443.
3. Click Go to open the ProxyBlocker Introductory Window: